Mercedes-Benz COMAND MY06 Operator's Manual page 169

System
System settings
Starting individualization
i
You can only activate the individualiza-
tion function when the car is station-
ary. If the car is moving, the following
Individualization only
message appears:
possible when car is stationary
Press  to select menu item
individualization
.
Press .
The individualization process starts.
The system now guides you through
the individualization process using a di-
alog, all operations are voice inputs.
After completion of the first stage, the sys-
tem prompts you to save the data from the
first stage.
168
If you don't save the first stage:
Individualization is cancelled,
Data from an existing first stage re-
mains unchanged.
If you save the first stage:
.
Data from an existing first stage is
over-written but is not saved until the
Start new
second stage is started.
If you don't start the second stage:
Data from the first stage remains un-
changed,
The individualization process is fin-
ished.
i
If you later decide to start the second
stage, you must restart the individual-
ization process from the beginning of
the first stage.
After completion of the second stage, the
system prompts you to save the data of the
second stage.
If you don't save the second stage:
Individualization is cancelled,
Data from an existing second stage re-
mains unchanged.
If you save the second stage:
Data from an existing second stage is
deleted and all new data is saved,
Individualization is finished.