Mercedes-Benz COMAND MY06 Operator's Manual page 134

If available, the street following the driving
maneuver with its name is shown in the top
CHESTNUT RIDGE RD
status bar (here
The destination is marked with a flag
the map, any stop-over destination is
s
marked with a flag .
Changing map scale
The currently selected map scale is shown
in the left-hand corner of the bottom status
bar .
i
The display unit can be changed to km
).
or miles using the control system (see
on
your vehicle Operator's Manual).
When the display unit is set to miles,
COMAND will indicate distances in
miles (mi) or feet (ft).
When the display unit is set to km,
COMAND will indicate distances in kilo-
meters (km) and meters (m).
Press any soft key.
The soft key displays appear.
i
If no soft key is selected within
approx. 8 seconds, the soft key display
will disappear.
Navigation*
Route guidance
Press the or soft key.
Depending on your selection, the map
will zoom in and display greater detail
or zoom out and show a wider area.
The map scale bar in the status bar will
show the map scale currently selected.
Map orientation
During route guidance, a symbol will ap-
pear on the left of the bottom status bar if
map display is switched ON:
North symbol :
Fixed map orientation, north is always
pointing up;
or
Compass symbol :
Dynamic map orientation, driving direc-
tion is always pointing up.
Map orientation can be set manually
( page 143).
133