Mercedes-Benz COMAND MY08 Operator's Manual page 44

Audio
Radio operation
Ending Scan search manually
Press the Scan soft key again.
Manual tuning
Switch to the desired waveband
( page 40).
Press or for at least 2
seconds to scroll up or down.
Manual tuning is activated.
44
Keep the button pressed or release it
and keep tapping or
quick succession.
The frequency will change by the tuning
increments for the respective wave-
band each time one of the buttons is
pressed or for as long as a button is
pressed and held.
Manual tuning is deactivated if no but-
ton is pressed for approx. 3 seconds.
i
Manual tuning is also possible in all
wavebands by pressing or
The frequency will change by the tuning
increments for the respective wave-
band each time one of the buttons is
pressed.
Frequency increments for manual
tuning:
FM 0.2 MHz
AM 10 kHz
Tuning via direct frequency input
in
Entry example:
98.5 MHz in FM waveband
Switch to the FM waveband
( page 40).
Press .
The frequency input display appears.
The frequency range of the FM wave-
band is shown.
.