Selecting A Poi Using The Map - Mercedes-Benz COMAND MY08 Operator's Manual

Press the Details soft key if you want
to see details of a selected POI.
The details disappear after
approx. 3 seconds, or when pressing
the Details soft key again.
Press .
The Start Route Guidance menu
( page 131) appears.

Selecting a POI using the map

Press ;
or
In the Destination entry menu
( page 118), press the Map
The full-screen map appears. Symbols
indicate the POIs.
i
The POI symbols to be displayed can be
selected ( page 147).
POI symbols are indicated only if the
map scale is set to 0.05 mi (50 m), 0.1
mi (100 m), 0.2 mi (200 m), or 0.5 mi
(500 m).
To change the map scale ( page 133).
If required, use , ,
or to move the map.
POIs (Points of Interest)
If the soft key displays are hidden,
press any soft key.
The soft key displays appear.
soft key.
Press the Symbol
A POI is selected and highlighted in col-
or. Its name appears in the status bar.
, ,
Navigation*
soft key.
159