Mercedes-Benz 2013 CL Operator's Manual page 78

SmartKey
76
To unlock the vehicle: pull the door
X
handle.
To lock the vehicle: touch sensor
X
surface :.
Convenience closing feature: touch
X
recessed sensor surface ; for an
extended period (
If you pull on the handle of the trunk lid, only
the trunk of the vehicle is unlocked.
If the vehicle has been parked for a long time,
the sensor surfaces are deactivated
automatically. In order to unlock the door,
pull the door handle. In order to reactivate the
sensor surface, switch the ignition on again.
Changing the settings of the locking
system
You can change the setting of the locking
system in such a way that only the driver's
door and the fuel filler flap are unlocked. This
is useful if you frequently travel on your own.
To change the setting: press and hold
X
down the % and & buttons
simultaneously for approximately
six seconds until the battery check lamp
flashes twice ( page 77).
Y
i
If the setting of the locking system is
changed within the signal range of the
vehicle, pressing the & or % button
locks or unlocks the vehicle.
The SmartKey now functions as follows:
To unlock the driver's door: press the
X
% button once.
To unlock centrally: press the %
X
button twice.
To lock centrally: press the & button.
X
page 89).
Y
The KEYLESS-GO function is changed as
follows:
To unlock the driver's door: pull the door
X
handle on the driver's door.
To unlock centrally: pull the front-
X
passenger door handle.
To lock centrally: touch the outer sensor
X
surface on one of the door handles.
Restoring the factory settings
Press the % and & buttons
X
simultaneously for approximately
six seconds until the battery check lamp
flashes twice.
Mechanical key
General notes
If you use the mechanical key to unlock and
open the driver's door or the trunk lid, the
anti-theft alarm system will be triggered
( page 71).
Y
There are several ways to turn off the alarm:
To turn the alarm off with the
X
SmartKey: press the % or & button
on the SmartKey.
or
Insert the SmartKey into the ignition lock.
X
or
To deactivate the alarm with KEYLESS-
X
GO: press the Start/Stop button in the
ignition lock. The SmartKey must be in the
vehicle.
or
Lock or unlock the vehicle using KEYLESS-
X
GO. The SmartKey must be outside the
vehicle.