Steering Wheel - Mercedes-Benz 2013 CL Operator's Manual

Adjusting the steering wheel
To adjust the steering wheel position
:
(fore-and-aft adjustment)
To adjust the steering wheel height
;
i
Other topics:
EASY-ENTRY/EXIT feature
R
( page 101)
Y
storing settings ( page 104)
R
Y
operating the on-board computer
R
( page 335)
Y
Steering wheel heating
Switching on/off
The steering-wheel heating heats the leather
areas of the steering wheel.
Make sure that the SmartKey is in position
X
2 in the ignition lock.
To switch on/off: turn the lever in the
X
direction of arrow : or ;.
Indicator lamp = lights up or goes out.

Steering wheel

Vehicles without KEYLESS-GO: when you
remove the SmartKey from the ignition lock,
the steering wheel heating is deactivated.
Vehicles with KEYLESS-GO: when you switch
off the ignition and open the driver's door, the
steering wheel heating is deactivated.
i
The steering wheel heating is deactivated
when the temperature in the vehicle
interior is higher than 86 ‡ (30 †).
i
The steering wheel heating is switched off
automatically after about 24 minutes.
EASY-ENTRY/EXIT feature
Important safety notes
The EASY-ENTRY/EXIT feature makes getting
in and out of your vehicle easier.
You can activate and deactivate the EASY-
ENTRY/EXIT feature using COMAND
( page 234).
Y
G
WARNING
You must make sure no one can become
trapped or injured by the moving steering
wheel and driver's seat when the EASY-
ENTRY/EXIT feature is activated.
To stop steering wheel and seat movement,
do one of the following:
move the seat adjustment switch.
R
move the steering column adjustment
R
switch.
press one of the memory function position
R
buttons or memory button M.
Do not leave children unattended in the
vehicle, or with access to an unlocked vehicle.
Children could open the driver's door and
unintentionally activate the EASY-ENTRY/
EXIT feature. This could result in an accident
and/or serious personal injury.
G WARNING
Let the system complete the adjustment
procedure before setting the vehicle in
motion. All steering wheel adjustment must
101
Z