Mercedes-Benz 2013 CL Operator's Manual page 201

Directly in the station presets: select
X
Presets by sliding VÆ and turning cVd
the COMAND controller and press W to
confirm.
or
Press W the COMAND controller when the
X
display/selection window is active.
The station preset memory appears. The
# dot indicates under which preset the
currently selected station is stored.
Select a station by turning cVd and
X
pressing W to confirm or press a number
key, e.g. l.
Using the multifunction steering wheel
Press = or ; to select the
X
menu.
Press 9 or : briefly.
X
Selecting stations by entering the
frequency manually
Option 1: press the Ä button.
X
Option 2: select Radio
X
by sliding VÆ and turning cVd the
COMAND controller and press W to
confirm.
Select Enter Frequency
X
confirm.
Irrespective of the option chosen, an input
menu will appear.
Enter a frequency using the number keys.
X
COMAND tunes in to the frequency
entered.
Waveband Frequency
AM (MF) 530 – 1700 kHz
FM (VHF) 87.7 – 107.9 MHz
WB (Weather Band) Weather report
channels
i
You can only enter currently permitted
numbers.
i
wavebands which is outside the frequency
range, COMAND tunes in to the next lower
frequency.
Storing stations
Storing stations manually
There are twenty presets available for the FM
and AM wavebands.
Quick save: press and hold a number key,
X
e.g. l, until you hear a tone.
The station is stored.
Directly in the station presets: press W
X
the COMAND controller when the display/
selection window is active.
Audio
or
Select
X
cVd the COMAND controller and press
W to confirm.
In both cases, the station presets appear.
The # dot indicates under which preset
the currently selected station is stored.
in the radio display
and press W to
Example display: station presets
Select a preset by turning cVd the
X
COMAND controller and press and hold
W until you hear a tone.
The station is stored under the preset.
Storing stations automatically
This function automatically stores stations
with adequate reception under the presets.
The search starts at the lowest frequency.
COMAND stores any stations found,
If you enter a frequency in the FM or AM
Presets by sliding VÆ and turning
Audio
199
Z