Mercedes-Benz 2013 CL Operator's Manual page 461

Checking the tire pressures
Important safety notes
Observe the "Tire pressure information"
section ( page 455).
Y
Information on air pressure for the tires on
your vehicle can be found:
on the vehicle's Tire and Loading
R
Information placard on the B-pillar
on the tire pressure label on the fuel filler
R
flap
in the "Tire pressure information" section
R
Checking tire pressures manually
To determine and set the correct tire
pressure, proceed as follows:
Remove the valve cap of the tire that is to
X
be checked.
Press the tire pressure gauge securely onto
X
the valve.
Read the tire pressure and compare it with
X
the recommended value on the Tire and
Loading Information placard on the
B-pillar on the driver's side of your vehicle.
If necessary, increase the tire pressure to
X
the recommended value (
If the tire pressure is too high, release air
X
by pressing down the metal pin in the valve
using the tip of a pen, for example. Then
check the tire pressure again using the tire
pressure gauge.
Screw the valve cap onto the valve.
X
Repeat these steps for the other tires.
X
Tire pressure monitor
Important safety notes
It is the driver's responsibility to set the tire
pressure to that recommended for cold tires
which is suitable for the operating situation
( page 455). Note that the correct tire
Y
pressure for the current operating situation
must first be taught-in to the tire pressure
monitor. If there is a substantial loss of
pressure, the warning threshold for the
warning message is aligned to the reference
values taught-in. Restart the tire pressure
monitor after adjusting the pressure of the
cold tires (
pressures are saved as new reference values.
As a result, a warning message will appear if
the tire pressure drops significantly.
The tire pressure monitor does not warn you
of an incorrectly set tire pressure. Observe
the notes on the recommended tire pressure
( page 455).
Y
The tire pressure monitor is not able to warn
you of a sudden loss of pressure, e.g. if the
tire is penetrated by a foreign object. In the
event of a sudden loss of pressure, bring the
vehicle to a halt by braking carefully. Avoid
abrupt steering maneuvers.
If a tire pressure monitor system is installed,
the vehicle's wheels have sensors that
monitor the tire pressures in all four tires. The
tire pressure monitor warns you if the
pressure drops in one or more of the tires. The
tire pressure monitor only functions if the
correct sensors are installed to all wheels.
The tire pressure monitor has a yellow
warning lamp in the instrument cluster for
page 455).
Y
indicating pressure loss/malfunctions (USA)
or pressure loss (Canada). Whether the
warning lamp flashes or lights up indicates
whether a tire pressure is too low or the tire
pressure monitoring system is
malfunctioning:
if the warning lamp is lit continuously, the
R
tire pressure on one or more tires is
significantly too low. The tire pressure
monitor is not malfunctioning.
USA only: if the warning lamp flashes for
R
around a minute and then remains lit
constantly, the tire pressure monitor is
malfunctioning.
G
Each tire, including the spare (if provided),
should be checked at least once a month
when cold and inflated to the pressure
Tire pressure
page 461). The current
Y
WARNING
459
Z