Mercedes-Benz 2013 CL Operator's Manual page 229

Changing the picture format
Press W the COMAND controller to show
X
the menu.
Select Video by sliding VÆ and turning
X
cVd the COMAND controller and press
W to confirm.
Select Video DVD and press W to confirm.
X
Select DVD-V and press W to confirm.
X
The DVD-V menu appears. The ä dot in
front of a menu item indicates the current
setting.
Select Auto, 16:9 optimized,
X
Widescreen and press W to confirm.
Select a setting by turning cVd the
X
COMAND controller and press W to
confirm.
Video DVD mode
Safety notes
G
WARNING
COMAND is classified as a Class 1 laser
product. You must not open the casing. If you
open the casing, or if the casing is faulty or
damaged, there is a risk of exposure to
invisible laser radiation. This may damage
your eyes, or those of others.
COMAND does not contain any parts that can
be serviced by the user. For safety reasons,
all maintenance work must be carried out by
qualified aftersales technicians.
G
WARNING
Only when the vehicle is stationary should
you:
load a disc
R
eject a disc
R
There is a risk of being distracted from the
road and traffic conditions if this is done while
the vehicle is in motion.
Notes about discs
There may be playback problems when
playing copied discs. There are a large variety
of discs, DVD authoring software, writing
software and writers available. This variety
means that there is no guarantee that the
system will be able to play discs that you have
copied yourself.
! Do not affix stickers or labels to the discs,
as they could peel off and damage
COMAND. Stickers can cause the disc to
bend, which can result in read errors and
4:3 or
disc recognition problems.
! COMAND is designed to accommodate
discs which comply with the EN 60908
standard. You can therefore only use discs
with a maximum thickness of 1.3 mm.
If you insert thicker discs, e.g. those that
contain data on both sides (DVD on one
side and audio data on the other), they
cannot be ejected and can damage
COMAND.
Use round discs with a diameter of 12 cm.
Do not use discs with a diameter of 8 cm,
even with an adapter.
DVD playback conditions
If video DVDs do not conform to the NTSC or
PAL TV standards, they may create picture,
sound or other problems during playback.
COMAND can play back video DVDs
produced according to the following
standards:
region code 1 or region code 0 (no region
R
code)
i
If you insert a video DVD with a different
region code, you will see a message to this
effect.
PAL or NTSC standard
R
You will generally find the relevant details
either on the DVD itself or on the DVD case.
i
COMAND is set to region code 1 at the
factory. This setting can be changed at an
Video
227
Z