Table of Contents
Advertisement
Design
Explanation
The display is set
Day Mode
permanently to day
design.
Night Mode
The display is set
permanently to night
design.
Automatic
The display design
changes depending on
the brightness around
the vehicle.
i
In the
Automatic
setting, COMAND
evaluates the readings from the automatic
vehicle light sensor and switches between
the display designs automatically.
Time settings
General information
If COMAND is equipped with a navigation
system and has GPS reception, COMAND
automatically sets the time and date. You can
also adjust the time yourself in 30-minute
increments, but the date cannot be changed.
i
If you set the time in 30-minute
increments, any time zone settings and
settings for changing between summer and
standard time are lost (
i
The following navigation system functions
require the time, time zone and summer/
standard time to be set correctly in order
to work properly:
route guidance on routes with time-
R
dependent traffic guidance
calculation of expected time of arrival
R
Setting the time
Select
X
turning cVd the COMAND controller and
press W to confirm.
Select
X
COMAND controller and press W to
confirm.
Select
X
controller and press W to confirm.
Select
X
:
;
Set the time by turning cVd the COMAND
X
controller and press W to confirm.
Setting the time/date format
Select
X
page 130).
Y
turning cVd the COMAND controller and
press W to confirm.
Select
X
COMAND controller and press W to
confirm.
Select
X
controller and press W to confirm.
Select
X
The # symbols show the current settings.
System settings
Vehicle
in the main function bar by
System
by turning cVd the
Time
by turning cVd the COMAND
Time
and press W to confirm.
Setting the time
Current date (set automatically by
COMAND)
Vehicle
in the main function bar by
System
by turning cVd the
Time
by turning cVd the COMAND
Format
and press W to confirm.
129
Z
Advertisement
Chapters
Table of Contents
