Using Gps - Pharos iGPS-CF User Manual

7.3 Using GPS

The map sample (Figure 6)
shows the driving route (blue
path) and the iGPS receiver
indicator (red arrow). The
arrowhead indicates the
direction of travel.
2 (two) steps are required to use
an iGPS receiver with Ostia
software.
1. Connect the iGPS receiver
to your Pocket PC using
the instructions in
.
7.2
2. Enable the iGPS receiver
function. (
)
5.1.4
As you travel, the iGPS receiver
constantly monitors incoming
signals from the GPS satellites,
calculates your present position
and updates the GPS symbol on
your map.
section
See section
Figure 6
Page 72