Pharos iGPS-CF User Manual page 52

Waypoint
1. Select a category of point of interest from
the scrollable list, then press Next to
proceed to step 2.
2. Select the desired point of interest. Press
Finish.
The selected point of interest is marked and its
nearest road segment or intersection will be
displayed in Green if an origin or Red if a
destination.
Note: To modify a previous selection, press
the Back button.
Select this item to input a
Latitude/Longitude coordinate as a mark on
the map to navigate to.
Input allows you to enter the coordinates you
wish to appear as a mark on the map or click
GPS to set your current GPS position as a
mark.
Note: There is a box labeled Save as
waypoint. This will allow for the Lat/Lon mark
to be saved for later use.
Select allows you to choose from Lat/Lon
coordinates that you previously saved as
Page 52