Download Print this page

Chapter 1: Attention; Chapter 2 : How To Install And Remove The Shelf - Frigidaire FWC18B Instruction Manual

Hide thumbs

Advertisement

Chapter 1: ATTENTION

To prevent the door gasket damage, make sure to have the door all the way opened when pulling
shelves out of the rail compartment.
The appliance must be positioned with the plug accessible area. Release the power cord and move
your cabinet to its final location. Do not move your cellar while loaded with wine. You might distort
the body and inappropriate impact. The wine cooler should be installed in a suitable place in order
to avoid touching the compressor by hand.
If the door hinge need to adjust for your desire direction, please directed toward a certified
electrician or an authorized product service center in avoid inappropriate impact on operation.
If the supply cord is damaged, it must be replaced by certified electrician or an authorized product
service center.
Attention
• Store wine in sealed bottles;
• Do not overload the cellar;
• Do not open the door unless necessary in avoid temperature fluctuation;
• Do not cover shelves with aluminum foil or any other shelf material which may prevent air
circulation;
Should the Wine cellar be stored without use for long periods it is suggested, after a careful
cleaning, leave the door ajar to allow air to circulate inside the cellar. This will avoid possible
formations of condensation, mold or odors.

Chapter 2 : HOW TO INSTALL AND REMOVE THE SHELF

FWC18B
For easy access to the storage content, you must pull the shelves approximately 1/3 out of the rail
compartment, however this unit was designed with a notch on each sides of the shelf tracks to
prevent bottles from falling.
When removing any of these shelves out of the rail compartment, to fit or remove the shelf, tilt the
shelf as per the diagram and simply pull out, or push in the shelf until it sits on the support
brackets securely.
FWC33B FWC46BD FWC50B FWC110B FWC110BD FWC168B FWC154BD
For easy access to the storage content, you must pull the shelf approximately 1/2 out of the rail
compartment, however this unit was designed with a post on each sides of the shelf track to
prevent bottles from falling.
When removing the shelf out of the inner rail, make sure to remove all items first. Then move the
shelf to the position where the notch of shelf is exactly under the post and lift the shelf. In order to
replace the shelf, repeat steps described above in reverse.
3

Hide quick links:

Advertisement

loading

  Related Manuals for Frigidaire FWC18B

This manual is also suitable for:

Fwc33bFwc46bdFwc50bFwc110bFwc110bdFwc168b ... Show all