Inserting The Batteries - Sharp VC-H85X Operation Manual

The remote control lets you operate your VCR at a
distance. Just aim the front of the remote control at
the photoreceptor window situated on the front panel
of your VCR and press the control buttons as you
would on your VCR.

Inserting the Batteries

Battery Cover
The remote
o p e r a t e s o n
batteries (included). If the
remote control does not
operate or fails to function
normally,
batteries, which can be
purchased at electronics or
camera stores.
Slid e out Slide in
batteries that may be in the remote control.)
and -) to the markings inside the remote control.
You can set the clock and timer recordings using
l
the remote control.
Clock setting: see SETTING THE CLOCK
Timer recording: see RECORDING WITH THE
TIMER
NOTES:
Do not subject the remote control to shock, water or
l
excessive humidity.
The remote control may not function if the VCR
l
sensor is in direct sunlight or any other strong light.
If so, move the VCR or alter the lighting.
Incorrect use of batteries may cause them to leak or
l
burst.
Do not mix old and new batteries, or mix brands in
l
use.
Batteries are available in rechargeable and
l
disposable configurations. Read the battery
warnings and use the batteries properly.
Remove the batteries if the remote control will not
l
be operated for an extended period of time.
control
t w o R 6
use new
OPERATE button-
EJECT button
CHANNEL up/down
buttons
PLAY button
REW button
FF button
STOP button
SLOW O/O buttons
DISPLAY button
DPSS buttons
[Inside the panel]
S H A R P
DISPLAY button
CLEAR button
-----CLOCK button
REPEAT button
REC button
in TV mode)
Remote Control LCD
the button once and m lights on th6
LCD), this remote control can
programme getting buttons
(TV CHANNEL up/down)
ZERO BACK button
(TV VOL. down)
C-LOCK button (TV VOL. up)
x2 button
PROG button
PROG CALL button
Numeric buttons
Used to set the time and the
l
timer, and to select the
channel directly.
If a number greater than 47
IS
l
selected, the channel position
will not change.
Press the CHANNEL w/down
buttons to select AV channel
I-
position situated after channel
47 and before channel 0.
digit or double-digit entry of a
channel posltion when it is
entered with the 0 to 9
buttons.
6