Cancelling Timer Settings - Sharp VC-H85X Operation Manual

Press the PROG button. The start time display
disappears and the stop (finish) time display
starts flashing. Set the stop time using the 0 or
way as described in step 0. (Set to "IO:30 AM".)
Press the PROG button. "lo:30 AM" disappears,
and the channel position number to be recorded
starts flashing. Set the channel number using
the 0 or 0 button or numeric buttons (if the
channel number is a single digit, first enter 0).
(Set to "Y.)
NOTES:
To record in the LP (Long Play) mode, press the SP/LP button once. ("LP"
l
will light To return to SP (Standard Play) mode, press the SP/LP button
up.)
again ('SP"will light up.)
To record audio and video from an external source through the
l
AUDIO/VIDEO IN terminals on the rear of the VCR, select the AV channel
position situated after channel 47 and before channel 0.
To record in the simulcast mode, press the SIMUL button ("SIMUL" lights).
l
Press the button again to cancel the simulcast mode.
NOTE:
The disolaved timer oosition number is
cannot be ttansferred: ("PROG" flashes.) Transfer again after clearing the
timer.
Thirty seconds after the transfer or one minute after setting the
programmes, the display on the remote control automatically changes to
the present time.
To input additional timer programmes, repeat steps @ through 0. The
VCR can store up to 8 preset timer programmes. The contents of a
programme stored in the remote control will disappear 30 seconds after
transferring or 60 seconds after setting the programme.
Press the COLOUR MODE button inside the front panel to check that the
colour mode is set to auto mode ("AUTO" is displayed). If the mode is set to
fixed colour mode ("PAL" is displayed), press the COLOUR MODE button to
select the auto mode.
To set the VCR for automatic
timer recording, point the remote
control at the VCR, press the
TIMER ON/OFF button and
ensure the "TIMER" indication
lights on the VCR display.
NOTES:
If the video
l
stop, eject the cassette, and shut off automatically.
If power is interrupted for more than 60 minutes (power failure, etc.), all timer settings
l
will be cancelled.
If the TIMER ON/OFF button is pressed when there is no cassette loaded, "TIMER"
l
flashes for 5 seconds, indicating that timer recording is not possible.
If the TIMER ON/OFF button is pressed while a cassette with an uncovered erasure
l
protection hole is loaded, "TIMER" flashes and the cassette is ejected.
When
l
operation, clock setting and setting/cancelling/confirming timer positions, press the
TIMER ON/OFF button to disengage the timer ("TIMER" disappears), and then turn
on your VCR.
During timer recording, the timer cannot be set or checked.
l
To terminate timer recording, press the STOP button during timer recording.
l
If no buttons are pressed within one minute while setting a timer programme position,
l
the mode automatically returns to the previous mode.
cancelled.
"PROG" flashes during timer recording.
l
Set the timer using the remote control.
l
Confirming Timer Settings
disappears.)
numbered of the unprogrammed timer positions will be displayed.
[VCR Display]
Press the 0 or 0 button to select the timer position number you wish to
confirm.
display changes, and all of the contents of a given preset timer position
are displayed.
Press the TIMER ON/OFF button again to engage the timer.

Cancelling Timer Settings

Press the TIMER ON/OFF button to disengage the timer. ("TIMER"
disappears.)
Press the PROG CALL button on the remote control. The lowest-
numbered of the unprogrammed timer positions will be displayed.
Press the
cancel.
Make sure the selected timer position number is the one to be cancelled
and then press the CLEAR button on the remote control.
When you press the CLOCK button on the VCR, the display returns to the
present time.
NOTE:
During timer setting, and when confirming or cancelling timer settings, you
l
cannot change the channel positions on the VCR with the remote control.
cassette runs
out before recording all the programmes, your VCR will
" T I M E R " i s l i t , r e g u l a r V C R o p e r a t i o n , c l o c k s e t t i n g a n d
18