Cable Connections; Connecting Ac Power Cord - Sharp VC-H85X Operation Manual

Cable Connections

Disconnecting TV Cable
Disconnect the aerial cable from the
back of your TV set.
Connecting Aerial Cable to VCR
Connect the aerial cable to the
ANTENNA IN terminal of your VCR.
Connecting VCR to TV
Connect the supplied coaxial cable to
the RF OUT terminal of the VCR.
Plug the other end into your TV's
ANTENNA IN terminal.

Connecting AC Power Cord

Plug the provided AC power cord into
the AC power cord socket on the rear
of the VCR.
ANTENNA IN
Connected to outdoor or indoor
aerial cable
L
L
nel
ANTENNA IN
From AUDIO OUT
From VIDEO OUT
To ANTENNA IN
NOTES:
Stereo sound output is only possible using the AUDIO OUT terminals.
l
Sound from the radio frequency converter (RF OUT) is mono only.
The power cord should not be plugged into the power outlet until the above
l
connections have been completed.
If TV reception is weak, use a TV signal booster (not supplied).
l
4