Interruption A Program; Changing A Program; Annulling A Program; Option Selection - Smeg DWA214S. Instruction Manual

Hide thumbs Also See for DWA214S.:
Table of Contents

Advertisement

User instructions

INTERRUPTION A PROGRAM

To interrupt a program in progress:
press the START/PAUSE button (3 ) for a few seconds; the light of
the phase in progress remains on and the light of the program in
progress flashes (confirmation beep);
you may now restart the program by pressing button (3) again until it
restarts, or change or annul the program (see "C
", or "A
PROGRAM

CHANGING A PROGRAM

To change the running program it is necessary:
to interrupt the running program (see "I
select the new program;
start the program (see "S

ANNULLING A PROGRAM

To annul the program
press the START/PAUSE button (3 ) for a few seconds; the light of
the phase in progress remains on and the light of the program in
progress flashes (confirmation beep);
Keep the START/PAUSE button (3) pressed until the PROGRAM
PHASES lights (5) go out (confirmation beep). The lights of
programs 4 and 5 come on.
The water in the tank will be pumped out and the program will end at the
point where it was interrupted. When the operation is complete, the
PROGRAM PHASES lights (5) flash.
In case that the door is opened during the operation, to the next door
closing it is going to be necessary to start the program as shown in
paragraph "
S
TARTING THE PROGRAM
point in which it was interrupted.
In case that the tub temperature is higher than 50°C the program
will start about 30 seconds later.

OPTION SELECTION

Options are selected by pressing the relative button by the symbol of the
option required; the light comes on to confirm that the option has been
activated.
It is not possible to select any options when the soak
program is being used.
All options except "Flexi Tabs" are disabled at the end of the
wash cycle. To disable the "Flexi Tabs" option, press the
relative button (the light goes out).
All options, including "Flexi Tabs" are disabled when a
program is CANCELLED after it has begun.
NNULLING A PROGRAM
TARTING THE PROGRAM
". The program will resume from the
").
NTERRUPTION A PROGRAM
").
HANGING A
");
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents