Mazda 2008 Mazda3 4-Door Owner's Manual page 185

Mode selector dial
Turn the mode selector dial to select
airflow mode (page 6-4).
NOTE
If you want to slightly adjust the airflow
l
amount, set the mode selector dial at
For example, when the mode selector dial is
l
at the position between the
positions, airflow from the floor vent is less
than that of the
í
A/C switch
Push the A/C switch to turn the air
conditioner on. The indicator light on the
switch will illuminate when the fan
control dial is set at position 1, 2, 3, or 4.
Push the switch once again to turn the air
conditioner off.
and
position.
Climate Control System
NOTE
The air conditioner may not function when
l
the outside temperature approaches 0 °C
(32 °F).
(U.S.A., Canada)
l
When the mode is set to
fan control dial in a position other than 0
and the temperature control dial in the
maximum cold position, the air intake
selector switches to the recirculated air
mode and the A/C turns on.
If A/C is not desired, press the A/C switch
to turn it off.
Air intake selector
.
This switch controls the source of air
entering the vehicle.
Press the
between the outside air and recirculated
air modes.
It is recommended that under normal
conditions the switch be kept in the
outside air mode.
Outside air mode (indicator light
turned off)
Outside air is taken into the vehicle. Use
this mode for normal ventilation and
heating.
Recirculated air mode (indicator light
illuminated)
Outside air is shut off. Air within the
vehicle is recirculated.
Interior Comfort
or with the
switch to alternate
í
Some models.
6-7