optris PI 160 Operator's Manual page 44

44
The process interface has an integrated fail-safe mode. This allows to control conditions like interruption
of cables, shut-down of the software etc. and to give out these conditions as an alarm.
Controlled conditions on camera and software
Interruption USB cable to camera
Interruption data cable camera - PIF
Interruption power supply PIF
Shut-down of PIConnect software
Crash of PIConnect software
Fail-Safe-Output
Standard Process interface
ACPIPIF
√
√
√
√
-
0 V at analog output (AO)
Industrial Process interface
ACPIPIF500V2CBxx
√
√
√
√
√
open contact (fail-safe relay)/ green LED off