High Beam/Low Beam Select Switch - Chrysler 2009 PT Cruiser Owner's Manual

Turn Signal Control
If either light remains on and does not flash, or there is a
very fast flash rate, check for a defective outside light
bulb. If an indicator fails to light when the lever is
moved, it would suggest that the fuse or indicator bulb is
defective.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129

High Beam/Low Beam Select Switch

Push the multifunction lever away from the steering
wheel to switch the headlights to high beam. Pull the
lever toward the steering wheel to switch the headlights
back to low beam.
High Beam, Low Beam, and Passing Lights
3