Advertisement
Remove and discard existing ice service.
Follow instructions in appropriate Step 8A below.
Step 8A
Remove Ice tray tunnel.
step%*
Remove ice tray tunnel.
Disengage ice tunnel side and bot-
Remove two screws (C) and save
tom from retaining hooks. Lower tun-
them for installation of icemaker.
ne1 until side is clear of freezer shelf
Lift ice tray tunnel
off
plastic hook
and remove it from freezer. Discard
(0) and discard it.
ice tunnel.
Step 8A
1
Remove ice tray shelf.
Lift ice tray shelf up
to
disengage
from tabs on cabinet wall and pull
it
forward as shown.
Tilt ice tray shelf and remove it.
Discard shelf.
Reposition freezer shelf.
Step 8A
Remove Ice tray tunnel.
As you lift tab on left side in tunnel
with blade of screwdriver, pull tunnel
forward and out. Discard ice tunnel.
Remove ice tray shelf.
Pull ice tray shelf to disengage
pins
from holes on cabinet wall.
Tilt ice tray shelf and remove it.
Discard shelf.
c
Follow instructions in appropriate Step 8B below.
Step 8 8
Step 8 6
Step 8B
Applicable to models with a partial-
Applicable to models with a full-width
Applicable to models with a partial-
width shelf suspended from freezer
shelf and alternate shelf locations.
width shelf resting
on freezer floor.
width shelf.
Relocate shelf against left wall
(under
icemaker mounting area).
Remove shelf
to
provide working
roan
during icemaker kit installation.
top, or
to
models with a stepped full-
Reposition shelf at lowest level,
To reposition the 2-piece shelf
supports:
Slide part (E) up off base
t
10
Advertisement
