Age Recommendations; Stroller Assembly; Unpack Stroller; Wheels - BOB REVOLUTION SE Owner's Instruction Manual

AGE RECOMMENDATIONS

Your child should be at least 6
months old before riding in a BOB
stroller without a BOB Infant Car
Seat Adapter and compatible infant
car seat. Please note that babies
incapable of holding their head
up must have additional head and
neck support to ride safely and
comfortably. For off-road stroller use,
children should be at least 9 months
old. This pushchair is designed for
children up to 3 years or maximum 17
kg weight.
With the addition of the BOB Infant
Car Seat Adapter and compatible
infant car seat, newborns may be
able to ride in the stroller. Children
develop at different rates. Prior
to fi rst use, consult with your
pediatrician regarding suitability of
stroller use with your child.
Please refer to the below table for
age/use guidelines:
RECOMMENDED AGE
USE
Infant Car Seat 0 - 3 Years or until
Adapter (Walk Only) child reaches
maximum weight of
13 kg.
Walk Only 6 Months - 3 Years
or 17 kg weight
Off-Road 9 Months - 3 Years
or 17 kg weight

STROLLER ASSEMBLY

UNPACK STROLLER

Remove stroller and wheels from
box. Front wheel is stowed in folded
stroller.
Remove all packaging materials
and discard to avoid choking and
suffocation hazards.

WHEELS

Before attempting to install wheels,
®
read and understand warnings and
instructions completely.
Using your stroller with an
improperly adjusted wheel quick
release can allow the wheel to
vibrate, wobble or become
detached from the stroller.
Accordingly, it is critical that you:
• Ask your dealer to instruct you
on the proper technique for
safely installing and removing
your wheels.
• Understand and use the proper
method for securely clamping
a wheel to the stroller using a
quick release.
• Check to make sure the wheels
are securely clamped before
each use of the stroller.
The wheel quick release is a cam
device that supplies the clamping
force required to hold the stroller
wheel securely in place. To safely
secure a wheel to the stroller, it is
critical that you understand how
the quick release works, how to
use and adjust it properly and the
amount of force necessary to safely
secure the wheel.
The quick release is a cam device
and must be used correctly to
supply the necessary clamping
force to safely hold the wheel in
place. It is not a wing nut system
and turning the lever while holding
the tension adjusting nut does not
supply the required force to
safely clamp the wheel in the
dropouts.
27
2000008437 – 09/12