Page 1
RITAX RÖMER Kindersicherheit GmbH Blaubeurer Straße 71, 89077 ULM, Germany REVOLUTION STROLLER SE and CE ENGLISH Owner’s Instruction Manual READ AND UNDERSTAND THESE INSTRUCTIONS COMPLETELY! IMPORTANT - KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE Before attempting to assemble or use your new stroller, read and understand these assembly and use instructions completely, as well as the warnings at the beginning...
• Protect stroller when transporting • Accessories which are not approved or shipping to prevent damage to by BOB shall not be used. stroller and stroller components. • This product is not suitable... Check closely for damage after - as a substitute for a bed or cot.
Page 3
WARNINGS Types of use The BOB REVOLUTION CE/SE is ap- unit or car seat attachment devices proved for three different uses: are correctly engaged before use. - as a pushchair • Always re-adjust the harness when - as a travel system changing the seating position of your child.
Wrist Strap Seat Back Pocket CONGRATULATIONS Frame Release Handle Congratulations on your purchase ® ® of the BOB Revolution SE or ® Revolution CE. Parking Brake For updates to this manual, Quick Release warranty and other recent product Lever notifications, please visit www.
AGE RECOMMENDATIONS WHEELS Your child should be at least 6 Before attempting to install wheels, months old before riding in a BOB ® read and understand warnings and stroller without a BOB Infant Car instructions completely. Seat Adapter and compatible infant car seat.
ADJUST QUICK RELEASE Rotate the quick release lever so it The rear wheels are correctly curves away from the dropout. clamped in place by the force generated when the quick release Tension Adjusting Nut lever is closed and the cam action pulls the axle against the dropout, securing it in place.
To TIGHTEN tension adjusting nut, If the quick release lever cannot turn clockwise. be rotated to the FULLY CLOSED position, rotate the lever to the FULLY OPEN position and turn the FULLY CLOSED tension adjusting nut a quarter turn counterclockwise. Repeat the closing process.
FRONT WHEEL SECONDARY wheel quick release can allow the wheel to vibrate, wobble or RETENTION DEVICES become detached from the stroller. Your stroller fork utilizes secondary Make a periodical rutine check wheel retention devices designed to of adequate wheel fi xing and help keep the wheel from clamping.
FULLY OPEN position and turn the Tension Adjusting Nut tension adjusting nut a quarter turn clockwise and repeat the closing process. If the quick release lever cannot be rotated to the FULLY CLOSED position, rotate the lever to the Quick Release Lever 4.
To avoid injuries, never fold or unfold stroller with other individuals within reach of stroller. SNAP Ensure that all the locking devices are engaged before use. 1. Lift Red Frame Release Handle Keep tires on ground as stroller swing arm begins to swing open. FOLD STROLLER 1.
STROLLER ADJUSTMENTS CHOOSE WALK OR OFF-ROAD MODE If front fork is in “OFF ROAD MODE” front fork will be locked and the front fork/wheel will not swivel left or right as it does in “WALK MODE”. Never go off road with the stroller in walk mode.
4. Place Stroller On Level Ground Find a stretch of level ground about 5 Infl ating tires above 2 bar can meter long. damage the wheel and/ or tire resulting in loss of control and 5 meter injury. Aluminum wheels can have the tires 5.
Position 1: SOFTER If Stroller Pulls RIGHT If your stroller pulls RIGHT, turn tracking knob clockwise up to one half turn. CLICK Position 2: HARDER CLICK Tracking Knob NOTE: Every time stroller is folded, REPEAT roll test and adjust as stroller shocks default SOFTER position.
fully engages the locking disk. stroller unattended with or without the parking brake set. LOCKED POSITION 1. Set Parking Brake Rotate parking brake bar down into locked position. NOTE: Rear wheels should not rotate when parking brake is set. To ensure the brake is set properly, attempt to roll the stroller fore and 2.
Secure Wrist Strap Slip loop of strap securely onto wrist. 5. Adjust Shoulder Straps Open Velcro pads. Slide buckle up or down to adjust straps. Seat harness should fi t snug and be comfortable. RECLINE SEAT Set parking brake before making 6.
2. Retract Canopy REPEAT on opposite side. Push canopy toward handlebar. ACCESSORY ADAPTER This BOB stroller is equipped with an accessory adapter providing When seat is fully reclined, easy attachment for BOB Stroller backward tip over is more likely to...
INFANT CAR SEAT ADAPTER Removal of the Travel System The BOB Infant Car Seat Adapter Adapter: allows you to easily attach leading infant car seat models to a BOB Stroller utilizing the BOB Accessory Adapter feature. Installation of the Travel System Adapter:...
WEATHER SHIELD The Weather Shield is available as an 3. Pull Canopy Straps accessory and not included in your Pull canopy straps and secure box. to Velcro strips on back of canopy. When using the Weather Shield, rear fl ap must be positioned accordingly to ensure proper air fl...
fl ying insects. DIAPER BAG Clips directly to all BOB single and Adding weight to the seat back Duallie ® strollers. Shoulder strap, changes the center of gravity of 2000008437 –...
SNACK TRAY according to the instructions. We The Snack Tray easily inserts into expressly point out that only original any BOB Stroller utilizing the BOB accessories or spare parts may be Accessory Adapter feature, placing used. snacks and sippy cups at your child’s fi...
Need help?
Do you have a question about the REVOLUTION SE and is the answer not in the manual?
Questions and answers