Disassembly Of The Set - Sharp VL-H870S Service Manual

VL-H860S/H/VL-H870S
VL-H890S/VL-H94E
VL-H96E/VL-H960E

3. DISASSEMBLY OF THE SET

3-1. DISASSEMBLY OF THE VCR PARTS
Note:
Before removing the cabinet, turn off the power supply, and ascertain that the battery has been removed.
<1. Removal of the Cabinet L>
(1) Slide the VCR lid knob in the arrow direction, open the VCR
lid.
(b)
(2) Remove the screws (b)LX-HZ0018TAFF(2pcs.).
(3) Turn the Camera section, and remove the screws
(i)XiPSN20P04000(1pc.), (d)XiPSF20P04000(1pc.).
(4) Remove the A.V.terminal cover and the screws
(i)XiPSN20P04000(3pcs.).
(5) Remove the screws (i)XiPSN20P04000(2pcs.).
FPC connector
(6) Close the VCR lid.
(7) Lift about half of the L.Cabinet parts in the arrow direction,
remove the FPC connector.
(i)
(8) Remove the outside charging battery connector.
(d)
(9) Remove the A.V.terminal FPC.
Note:
The FPCs and the wires of process (7), (8), and (9) are connect-
ing with the L.Cabinet, and remove the L.Cabinet while it is
(i)
floating from the main body.
If the L.Cabinet is drawed violently, they have some apprehen-
sions of snap off the wires.
3-1
(i)
L.Cabinet
VL-H870U
VL-H860S/H/VL-H870S
VL-H875U
VL-H890S/VL-H94E
VL-H890U
VL-H96E/VL-H960E
A.V.terminal FPC