Table of Contents
Advertisement
Machine specifications (Continued)
Duplex module
Output tray (Centre tray)
Interface port
* Type A connectors are located on the front and back right of the machine (two
connectors); however, the connectors cannot be used simultaneously. The connector
on the back of the machine is not initially available for use. If you wish to use the
connector, contact your service assistance.
Paper sizes: A4, B5, A5, 8-1/2" x 14", 8-1/2" x 13-1/2",
8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11",
5-1/2" x 8-1/2", 16K
Paper weight: Plain paper (60 g/m
to 28 lbs.))
Paper types:SHARP-recommended plain paper,
recycled paper, and coloured paper
Output method: Face-down output
Output capacity: 250 sheets (using SHARP-recommended
A4 or 8-1/2" x 11" paper)
(The maximum number of sheets that can be held varies
depending on ambient conditions in the installation
location, the type of paper, and the storage conditions of
the paper.)
Tray full sensor: Yes
LAN connectivity: 10Base-T / 100Base-TX /
1000Base-T
USB connectivity: Type A connector supports USB 2.0
(Hi speed)*
Compatibility requirements of USB 2.0
Memory Capacity: Max. 32 GB
Disk Format:
Type B connector supports USB 2.0
(Hi speed)
SPECIFICATIONS
2
2
to 105 g/m
(16 lbs.
FAT32 only
15
Advertisement
Table of Contents
