Roland monoFabARM-10 User Manual page 45

I can't install the driver
If a wizard does not appear even though you have connected the USB cable, do the following:
Windows 8 / Windows 8.1
1.
Connect the machine to the computer with the USB cable and turn on the machine.
2.
If the Found New Hardware Wizard appears, click [Cancel]. Disconnect any USB cables for printers or other such equipment other than
this machine.
3.
From [Start], click [Desktop]. Point to the lower-right corner of the
screen to display the charms, and click [Settings].
4.
From [Control Panel], click
Manager]. If a "User Account Control"
[Continue].
"Device Manager"
The
5.
From the [View] menu, click [Show hidden devices].
6.
In the list, find [Printers]
below the item you selected, click it to choose it.
7.
Go to the [Action] menu, and click [Uninstall].
8.
In the "Confirm Device Uninstall"
Close the [Device Manager].
9.
Detach the USB cable connected to the printer, and restart Windows.
10.
Uninstall the driver according to the procedure in
11.
Reinstall the driver again following the driver installation procedure.
"For information on the driver installation procedure, refer to the
[Hardware and Sound]
and then
window appears, click
appears.
or [Other devices], then double-click it. When the model name you are using or
window, select [Delete the driver software for this device.], then click [OK].
"How to Start the Machine"
Windows 7
3.
[Start]
Click the
[Properties].
[Device
4.
Click [Device Manager]. If a
window appears, click [Continue].
The "Device Manager"
(p. 9).
"Roland DG Start-up page"
(http://startup.rolanddg.com/).
45
menu, then right-click [Computer]. Click
"User Account Control"
appears.
"Unknown device"
Appendix
appears