Table of Contents
Advertisement
MEMO
•
If the preview is displayed in an undesired shape, an object error may have occurred. Try correcting the object using the
tab.
Example of normal preview
•
The quality and precision of printing may vary depending on the condition of the resin, the influence of the liquid material vat, and the surrounding
environment. Therefore, the shape displayed in the print preview is not necessarily the exact shape that will be printed.
Check cross section
[
]
Clicking the
(Cross Section View) button on the toolbar displays a cross section
of the object.
[
]
Clicking
and dragging the box displayed in the cross section area up and down
(in the Z axis direction) lets you change the position of the cross section.
Cross section view can be used regardless of whether preview display is on or off.
•
Example of preview where object has problems
Shapes that are not
in the actual data are
displayed.
28
Output (Printing)
"Healing"
function on the
[Layout]
Drag the edge of the box
displayed in the cross section
area up and down (in the Z
axis direction).
Advertisement
Table of Contents
