Advertisement
a. Plug one end of the Cat5 cable into the Cat5 Port of the
user station.
b. Plug the other end of the cable into the User 2 port of
the KVM switch.
4. Connect the power adapter to the user station.
a. Plug one end of the power adapter into the power jack
of the user station.
b. Plug the other end of the power adapter into the
appropriate power outlet.
5. Turn on the connected monitor.
After finishing the installation and turning on all devices, you
can use the keyboard, mouse, and monitor connected with the
user station to access computers connected to the KVM switch.
QS Rule
Additional Information
For more information about the MCCAT and the entire Raritan
product line, see Raritan's website (www.raritan.com). For
technical issues, contact Raritan Technical Support. See the
Contact Support page in the Support section on Raritan's
website for technical support contact information worldwide.
MCCAT-UST QSG
QSG-MCCUST-0B-v2.1-E 255-31-1040-00
2
Advertisement
