Replacing The Belt Unit - Brother HL-L8250CDN User Manual

Hide thumbs Also See for HL-L8250CDN:
Table of Contents

Advertisement

Routine Maintenance

Replacing the belt unit

Model Name: BU-320CL
A new belt unit can print approximately 50,000 pages (5 pages per job)
1 2
(1 page per job)
1
A4 or Letter size single-sided pages.
2
Belt unit life is approximate and may vary by type of use.
Belt End Soon
Belt End Soon
If the LCD displays Belt End Soon, it means the belt unit is near the end of its life. Buy a new belt unit and
have it ready before you get a Replace Belt message. To replace the belt unit, see Replacing the belt unit
on page 135.
Replace Belt
When the following message appears on the LCD, you must replace the belt unit:
Replace Belt
IMPORTANT
• DO NOT touch the surface of the belt unit. If you touch it, it could degrade print quality.
• Damage caused by incorrect handling of the belt unit may void your warranty.
Replacing the belt unit
a
Make sure that the machine is turned on.
b
Press the front cover release button and pull open the front cover.
1 2
or 20,000 pages
5
5
5
5
5
135

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hl-l8350cdw

Table of Contents