Brother HL-L8250CDN User Manual page 104

General Information
Network for HL-L8350CDW
Submenu 1 Submenu 2
Wired LAN TCP/IP
(HL-L8350CDW)
Ethernet
Wired Status
MAC Address
Set to Default
Wired Enable
The factory settings are shown in Bold with an asterisk.
Menu Selections Options
Auto* / Static / RARP /
Boot Method
BOOTP / DHCP
IP Address ###.###.###.###
(000.000.000.000)*
Subnet Mask ###.###.###.###
(000.000.000.000)*
Gateway ###.###.###.###
(000.000.000.000)*
0 / 1 / 2 / 3* / ... / 32767
IP Boot Tries
On* / Off
APIPA
On / Off*
IPv6
- Auto* / 100B-FD /
100B-HD / 10B-FD /
10B-HD
- Active 100B-FD /
Active 100B-HD /
Active 10B-FD /
Active 10B-HD /
Inactive / Wired OFF
- -
Restores wired network settings of the internal print server to the factory
settings.
- On* / Off
Descriptions
Chooses the IP method
that best suits your
needs.
Enter the IP address.
1
Enter the Subnet mask.
1
Enter the Gateway
address.
1
Specifies the number of
attempts the machine
will try to obtain an IP
address when the Boot
Method is set to any
setting except Static.
Automatically allocates
the IP address from the
link-local address
1
range.
Enables or disables the
IPv6 protocol.
Chooses Ethernet link
mode.
Displays Ethernet link
status.
Displays MAC address
of the machine.
Chooses Ethernet link
mode.
3
97