GE RVM120H Use And Care Manual page 20

Questions?
PROBLEM
WILL NOT
OVEN
COME ON
CONTROL PANEL
LIGHTED, YET OVEN
WILL NOT START
FOODS ARE EITHER
OVERCOOKED OR
UNDERCOOKED
"EE EE" APPEARS
ON DISPLAY
"PR OB" APPEARS
ON DISPLAY
If you need more help.. call, toll free:
The GE Answer Center@
800.626.2000
consumer information service
POSSIBLE CAUSE AND REMEDY
A fuse in your home may be blown or the circuit breaker tripped. Replace fuse or
reset circuit breaker.
. Make sure 3-prong plug on oven is fully inserted into wall receptacle.
Door not securely closed.
entered already in oven and CLEAR/OFF not touched to cancel it.
Make sure you have entered cooking time after touching TIME COOK 1 or
TIME COOK 2.
CLEAR/OFF was touched accidentally. Reset cooking program and touch START.
. Temperature probe not inserted properly or not being used during Auto Roast or
Temp Cook/Hold.
COOK/HOLD.
Cooking times may vary because of starting food temperature, food density or
amount of foods in oven. Touch TIME COOK 1 and additional cooking time for
completion.
changing levels during cooking if necessary.
Dish was not rotated, turned or stirred. Some dishes require specific instructions.
Check cookbook or recipe for instructions.
. Too many dishes in oven at same time. Cooking time must be increased when cooking
more than one food item. Check cookbook for recommendation on increasing time.
Probe not inserted properly into meat or dish when using Temp Cook or Auto Roast
functions. Check cookbook or Auto Roast section of this book for specific instructions.
. When using Temp Cook/Hold, a temperature less than 90°F. or more than
When using Clock, you have not entered a valid clock time.
Probe has been forgotten or not seated properly in oven wall when using
Temp Cook/Hold or Auto Roast functions.
20