Do you have a question about the JVM2160 and is the answer not in the manual?
Questions and answers
Carole Gibson
June 1, 2025
My microwave’s clock turns off and beeps. Also, when the vent is on it turns off automatically after a short time.
1 comments:
Mr. Anderson
June 1, 2025
The clock on the GE JVM2160 microwave may turn off and beep if an invalid time is entered when setting the clock—specifically, if the time entered is beyond the clock’s range. When this happens, "0000" displays and two beeps sound to remind the user to re-enter the correct time.
The vent fan turns off automatically after a short time because it is programmed to operate in cycles: high speed for 12 minutes, low speed for 8 minutes, then back to high speed until cooking is done. Once cooking ends, the fan continues running and must be manually turned off by pressing the Vent/2 Speed pad.
This answer is automatically generated
Brock
April 30, 2025
Door won't latch closed and light inside stays on. Don't know if door latches are faulty or if some sort of spring inside the door is faulty
1 comments:
Mr. Anderson
May 16, 2025
The door not latching closed and the light staying on in a GE JVM2160 microwave could be caused by the door not being securely closed. Open the door and close it securely to ensure it latches properly. If the problem continues, it could indicate a mechanical issue with the door latch or switch.
Need help?
Do you have a question about the JVM2160 and is the answer not in the manual?
Questions and answers
My microwave’s clock turns off and beeps. Also, when the vent is on it turns off automatically after a short time.
The clock on the GE JVM2160 microwave may turn off and beep if an invalid time is entered when setting the clock—specifically, if the time entered is beyond the clock’s range. When this happens, "0000" displays and two beeps sound to remind the user to re-enter the correct time.
The vent fan turns off automatically after a short time because it is programmed to operate in cycles: high speed for 12 minutes, low speed for 8 minutes, then back to high speed until cooking is done. Once cooking ends, the fan continues running and must be manually turned off by pressing the Vent/2 Speed pad.
This answer is automatically generated
Door won't latch closed and light inside stays on. Don't know if door latches are faulty or if some sort of spring inside the door is faulty
The door not latching closed and the light staying on in a GE JVM2160 microwave could be caused by the door not being securely closed. Open the door and close it securely to ensure it latches properly. If the problem continues, it could indicate a mechanical issue with the door latch or switch.
This answer is automatically generated