Cook 'N Watch - GE RVM120H Use And Care Manual

Cooking by Time
The time cooking feature allows
you to preset the cooking time.
The oven shuts off automatically.
Power level 10 (High) is recommended
for most cooking, but you may
change this for more cooking
flexibility. See your cookbook.
To become better acquainted with
time cooking, make a cup of coffee
by following the steps below.
Step 1: Fill a cup 2/3 full of water,
add 1 teaspoon of instant coffee and
stir to dissolve. Use a cup that has
no metal decoration and is microwave
safe (see Microwaving Tips on page
2). Place cup in oven and close
door.
Step 2: Touch TIME COOK 1.
Display shows ": 0?' "ENTER 1
COOK TIME" flashes.
Step 3: Select your time. Touch
1,2 and O for a minute and 20
seconds. Display shows "1:20~'
"1 COOK TIME" flashes.
Because automatic power level 10
is recommended for this cup of
coffee, there is no need to change
the power level. (If power level 10
is not appropriate, see "How to
Change Power Level" at right.)
Step 4: Touch START. "COOK
TIME" and time counting down
show on display.
Step 5: When time is up, the oven
signals and flashes "End~' Oven,
light and fan shut off. Open the
door.
Using Time Cook 2 Feature
The Time Cook 2 feature lets you
set two time cooking functions
within one program. This is ideal
when you want to change power
levels during your cooking
operations. Here's how to do it.
Step 1: Place food in microwave-safe
container into oven. Close door.
Step 2: Touch TIME COOK 1 pad.
Display shows ": O:' "ENTER 1
COOK TIME" flashes.
Step 3: Select your cooking time.
For example, touch 2, 1 and 5 for
two minutes and 15 seconds.
Display shows "2:15:' "1 COOK
TIME" flashes.
Step 4: Touch TIME COOK 2 pad.
Step 5: Set your cooking time.
I
How to Change Power Level
After setting cooking time,
touch POWER LEVEL pad,
then touch desired number for
new power level.
Step 6: Touch START.
Step 7: Power level 10 is in use and
Cook Time 1 counts down.
Step 8: At the end of Cook Time 1,
second power level is in use and
Cook Time 2 shows counting
down.
Step 9: When time is up, the oven
signals and flashes "End?' The
oven, light and fan shut off.
Step 10: Open the door.

Cook 'N Watch

The Cook 'N Watch feature is a
short term cooking program which
automatically turns the oven off
after 3 minutes. It's ideal for
melting cheese on food or other
quick cooking operations where
you want to stop cooking at just
the right time.
To Use Cook 'N Watch
Step 1: Touch COOK 'N WATCH.
"START COOK 'N WATCH" flashes
on display.
Step 2: Touch START. "COOK 'N
WATCH" and time counting up to
3 minutes are displayed. Power level
10 is automatically set in oven but
another power level can be selected
either during programming or
during cooking.
Step 3: Open the door or touch the
CLEAR/OFF pad to stop cooking.
The oven will automatically signal,
flash "End" and shut off at the end
of 3 minutes.
Questions and Answers
Q. I set my oven for the time
called for in the recipe, but at the
end of the time allowed, my food
wasn't done. What happened?
A. Since house power varies due to
time or location, many time cooking
recipes give you a time range to
I
prevent overcooking. Set the oven
for minimum time, test the food for
doneness, and cook your food a
little longer, if necessary.
Q. I touched the number pads
and selected my power level. When
I touched START, however, my
oven didn't come on. Why not?
A. The TIME COOK 1 pad must
be touched before the number pads
and START.
Q. I want to cook on a power
level other than High. What do
I need to do?
A. To change the power level,
touch the POWER LEVEL pad.
"P-10" appears on the display
panel. Enter new number.
Q. Can I interrupt Time Cook
to check the food?
A. Yes. To resume cooking,
simply close the door and press
the START pad. The timer must be
reset for cooking to resume unless
time is remaining on timer.