Transferring A Call - AT&T Synapse SB67020 Quick Start Manual

Transferring a Call

To Transfer a call:
1. Press from the Active Call screen. The call is put on hold.
2. Make another call. You can also transfer to a held call by accessing it and
pressing the associated Call Appearance or Line Appearance key. If desired,
you can announce the transfer.
3. To complete the transfer, press
for two seconds.
Do Not Disturb Setup
To enable or disable Do Not Disturb (DND):
Press MENU, then 1, and then 5 (Call Appearance mode) or MENU, then 1, and then 4 (Line Appearance mode) to
turn the Do Not Disturb feature on or off.
DND appears on the Idle screen when DND is on. Do Not Disturb silences incoming ringing and paging. Incoming
calls can still be answered as long as the Call Appearance or Line Appearance LED is flashing.
. The Call Transferred screen displays
13
13