ZyXEL Communications P-2024 Series Support Notes page 20

Step 8. Click on Apply to save the changes and make the settings take effect. If you want to configure the
second SIP account, select SIP2 in the SIP Account field and follow steps 1 – 7.
Note: If you associate both phone ports are associated with both SIP accounts, you cannot identify which
account＇s incoming call is received.
The following table describes the screen labels.
Label
SIP Account
SIP Number
SIP Local Port Use this field to configure the P-2024's listening port for SIP. Leave this
Description
You can configure the P-2024 to use multiple SIP accounts. Select one to
configure its settings on the P-2024.
A SIP account's Uniform Resource Identifier (URI) identifies the SIP
account in a way similar to the way an e-mail address identifies an e-mail
account. It is also known as a SIP identity or address. The format of a SIP
identity is SIP-Number@SIP-Srevice-Domain.
A SIP number is the part of the SIP URI that comes before the "@" symbol.
Enter your SIP number in this field. You can use up to 31 ASCII
characters.
field set to the default if you were not given a local port number for SIP.
All contents copyright (c) 2006 ZyXEL Communications Corporation.
P-2024 Support Notes
20