Set Time Manually; Figure 44: Set Time Manually - Grandstream Networks UCM6510 User Manual

Self-­Defined Time Zone
SET T IME M ANUALLY
To manually set the time on the UCM6510, go to Web GUI-­>Settings-­>Time Settings-­>Set Time
Manually. The format is YYYY-­MM-­DD HH:MI:SS.
Firmware Version 1.0.2.5
If "Self-­Defined Time Zone" is selected in "Time Zone" option, users will
need define their own time zone following the format below.
The syntax is: std offset dst [offset], start [/time], end [/time]
Default is set to: MTZ+6MDT+5,M4.1.0,M11.1.0
MTZ+6MDT+5
This indicates a time zone with 6 hours offset and 1 hour ahead for DST,
which is U.S central time. If it is positive (+), the local time zone is west of
the Prime Meridian (A.K.A: International or Greenwich Meridian);; If it is
negative (-­), the local time zone is east.
M4.1.0,M11.1.0
st
The 1 number indicates Month: 1, 2, 3..., 12 (for Jan, Feb...Dec.).
nd
The 2 number indicates the nth iteration of the weekday: (1
rd
3 Tuesday...). Normally 1, 2, 3, 4 are used. If 5 is used, it means the last
iteration of the weekday.
rd
The 3 number indicates weekday: 0, 1, 2...6 (for Sun, Mon, Tues... Sat).
Therefore, this example is the DST which starts from the First Sunday of
st
April to the 1 Sunday of November.
Figure 44: Set Time Manually
UCM6510 IP PBX User Manual
st
Sunday,
Page 73 of 317