Use Recommended Paper; Understanding Jam Messages And Locations; X]-Page Jam, Clear Jammed Paper From Multipurpose Feeder. [200.Xx] - Lexmark MS911 Quick Reference Manual

•
Do not slide the paper into the tray. Load paper as shown in the
illustration.
•
Make sure the guides in the tray or the multipurpose feeder are
properly positioned and are not pressing tightly against the paper
or envelopes.
•
Push the tray firmly into the printer after loading paper.

Use recommended paper

• Use only recommended paper or specialty media.
• Do not load wrinkled, creased, damp, bent, or curled paper.
• Flex, fan, and straighten paper before loading it.
• Do not use paper that has been cut or trimmed by hand.
• Do not mix paper sizes, weights, or types in the same tray.
• Make sure the paper size and type are set correctly on the computer
or printer control panel.
•
Store paper according to manufacturer recommendations.
Understanding jam messages and
locations
When a jam occurs, a message indicating the jam location and
information to clear the jam appears on the printer display. Open the
doors, covers, and trays indicated on the display to remove the jam.
Notes:
• When Jam Assist is set to On, the printer flushes blank pages or
pages with partial prints after a jammed page has been cleared.
Check your printed output for blank pages.
• When Jam Recovery is set to On or Auto, the printer reprints
jammed pages. However, the Auto setting reprints jammed
pages only if adequate printer memory is available.
1 Area G
2 Door C
3 Door D
4 Door F
5 Trays
6 Door H
7 Finisher bins
8 Door J
6
Area name Control panel message What to do
Multipurpose [x]‑page jam, clear Remove the jammed
feeder jammed paper from paper from the feeder.
multipurpose feeder.
[200.xx]
Door C, trays [x]‑page jam, open door Open door C, and then
C and clear all jammed remove the jammed
paper. [2yy.xx] paper.
Pull out the tray, and
[x]‑page jam, slide the
then remove the
3000‑sheet tray and
jammed paper.
open door C. [2yy.xx]
Door D, trays [x]‑page jam, open door Open door D, and then
D and clear all jammed remove the jammed
paper. [24y.xx] paper.
Pull out the tray, and
[x]‑page jam, slide the
then remove the
3000‑sheet tray and
jammed paper.
open door D. [24y.xx]
Doors C and F [x]‑page jam, slide the Pull the 3000‑sheet tray,
3000‑sheet tray and and then remove the
open door F. [24y.xx] jammed paper from the
side of the tray.
Open door F, and then
remove the jammed
paper.
Area G, doors C, J, [x]‑page jam, open Open door G, and then
and H, finisher bin doors G, H, and J and remove the jammed
clear jammed paper. paper.
[4yy.xx]
Open door H, and then
remove the jammed
paper.
Doors C and G, [x]‑page jam, press latch Slide the staple finisher
finisher bin to access area G. Leave to the left, and then
paper in bin. [40y.xx] remove the jammed
paper.
Area G, doors C, J, [x]‑page jam, open door Open door H, and then
and H, finisher bin H and rotate knob H6 remove the jammed
clockwise. Leave paper paper.
in bin. [426.xx–428.xx]
[x]‑page jam, clear jammed paper from
multipurpose feeder. [200.xx]
1
Remove all paper from the multipurpose feeder.