Loading The Multipurpose Feeder - Lexmark MS911 Quick Reference Manual

2
Squeeze and slide the paper guides to the correct position for the
size of the paper you are loading.
Note: Use the indicators on the bottom of the tray to position
the guides.
3
Flex the sheets back and forth to loosen them, and then fan them.
Do not fold or crease the paper. Straighten the edges on a level
surface.
4
Load the paper stack with the printable side faceup.
Notes:
• Load printable side facedown for duplex printing.
• Load pre-punched paper with the holes toward the front or
the left side of the tray.
•
Load letterhead with the header on the left side of the tray.
•
Make sure that the paper is below the maximum fill line on
the edge of the paper tray. Overfilling may cause paper jams.
2
5
Insert the tray.
6
From the control panel, set the paper size and paper type in the
Paper menu to match the paper loaded in the tray.

Loading the multipurpose feeder

1
Open the multipurpose feeder.