Samsung AS09HPBN Training Manual page 38

6-2-7 Energy saving operation control
G In case of Cooling Only model
l The Energy saving mode is applicable only in the COOL mode and AUTO mode.
G In case of Heat Pump model
l The Energy saving mode is applicable to COOL mode only.
G Energy saving operation specification
- If you select the Energy saving mode during automatic operation, the setting temperature(Ts) will be fixed to "the standard value
+2°C"(26°C).
- If you select the Energy saving mode during cooling operation, you may set the room temperature from "26°C to 30°C",
but if you hope to control the room temperature below 26°C in the Energy saving mode, the room temperature will be
compelled to be 26°C.
- If you select the Energy saving mode, the up/down louver will enter the "Swing" status.
G
N Operation pattern A : In the Energy saving mode when Room Temperature(Tr) equals to the Setting Temperature(Ts) or over.
G
N Operation pattern B : In the Energy saving mode when Room Temperature(Tr) is below the Setting Temperature(Ts).
Samsung Electronics
Temperature
Ts+1
Ts
Compressor ON OFF
Temperature
Energy saving Ts+1
Energy saving Ts
Tr
Ts
General operation
mode
Compressor ON
Tg +ß
General operation mode
Tg
Energy saving mode starting
Tg +ß
Tg +ß
Tg←Tg+α
Tg←Tg+α
Tg
Energy saving Energy saving
mode starting pattern mode B
OFF
Feature & Operation
Energy saving
mode
Time
Energy saving
mode
Time
Change the Energy
saving pattern A.
37