Intel R1000WT Series System Installation And Service page 89

Intel ® Server System R1000WT Product Family System Integration and Service Guide
•
The control panel is properly positioned when the buttons are protruding from the Control Panel face plate on the
front of the drive bay module and the screw holes on the top of the assembly are aligned.
•
Using a single screw, secure the Control Panel Assembly to the drive bay module (8 in/lbs torque) (see letter "B")
•
Connect the other end of the front panel cable to the matching 30-pin connector on the server board
•
Install system fan assembly (see section 2.4.2)
•
Install air duct (see section 2.3.2)
Rev 2.2 75