Intel
®
Server System R1000WT Product Family System Integration and Service Guide
1.3 System Assembly
Server Board Installation
Note: Follow ESD precautions outlined at the beginning of this manual
•
Carefully move aside any cables that may be taped to the chassis base to clear the area for server board placement.
•
Remove the server board from its anti-static bag.
•
Holding the server board by its edges, carefully lower the server board into the chassis so that the rear I/O
connectors of the server board align with and are fully seated into the matching holes on the chassis back panel and
each server board mounting hole is aligned with a threaded chassis standoff.
•
The server board is accurately placed when the two screw holes nearest the front edge of the server board (See
letter "A") sit securely onto the shouldered chassis standoffs.
•
Using 12 in-lbs torque, fasten down the server board with 8 screws in the positions shown in Figure 6.
Attach SAS/SATA Data and Backplane Power Cables
6
Figure 6. Server Board Installation
Rev 2.2