Intel
®
Server System R1000WT Product Family System Integration and Service Guide
The accessory kit will include the following components:
•
The left and right black plastic air duct side walls
•
The Chassis Support Bracket
•
Optical drive power cable and mounting clip
•
Separate bags of screws for mounting the server board, air duct side walls, and chassis support bracket
The chassis will include the following components. Each should be removed:
•
Clear plastic air duct
•
A box with two processor heat sinks
•
Two riser card brackets
•
Two system fan assemblies
Remove each fan assembly module from the chasiss by grasping them on each side and pulling straight up away
from the chassis mounting pins
4
Figure 4. Chassis Components
Rev 2.2