Adjust The Volume Of The Different Speakers; Saving Frequently Used Settings (Quick Select Function) . -45; Various Memory Functions - Denon AVR-1610 Owner's Manual

ENGLISH
Adjust the volume of the
different speakers
Saving frequently used settings
(Quick Select Function)
Various memory functions
Personal Memory Plus Function
This function sets the settings (input mode, surround mode, HDMI
output mode, MultEQ, Dynamic EQ, Dynamic Volume, audio delay
etc.llast selected for the individual input sources.
The surround parameters, tone settings and the volumes of the
different speakers are stored for the individual surround modes.
This stores the settings as they were directly before the standby mode
was set.
When the power is turned back on, the settings are restored to as they
were directly before the standby mode was set.
Backup Memory
The various settings are backed up for about 1 week, even if the power
is turned off or the power cord is disconnected.
Last Function Memory
Press and hold the desired
- - QUICK SElECT--
IOVD) (SAT/CBlJ (VCRI ;Podl
t·1 "M "
[ I ] [ I ] IT]
un I emory
appears on the display.
The current settings will be memorized.
1
Set the items below to the settings you want to save.
CD
Input source (Grpage 34)
(1)
Input Mode (Grpage 32)
®
Surround Mode (Grpage 37)
o
Audyssey Settings (MultEQ, Dynamic EQ, Dynamic
Volume) (Grpage 41)
®
Front Speaker Setup (Grpage 26)
®
Volume setting (Grpage 34)
Saving the settings
This function allows you to save all the settings shown in step
1. When frequently used settings are saved, they can easily be
set again the next time you want to use them. This function also
allows you to always enjoy the same playback environment.
• Three sets of settings can be saved.
2
O. OdS
O.
ad
B
O. OdS
O. OdS
, .: SR
O. OdB SBR
O. OdS SSl
O. OdS Sl
Channel Volume
Fader
FRONT~: ~REAR
: CH S
e
I.
C
FR
SW
1
P
CHLEVEL
ress
o.
~----------""'
You can adjust the channel level either according to the playback
sources or to suit your taste, as described below.
Adjust the volume of the different speakers
2
Press!:::"
\l
to select the speaker.
The speaker that can be set switches each time one of the
buttons is pressed.
3
Press
<I
[> to adjust the volume.
*
In the case of a subwoofer, reducing the volume when it is at
"-12 dB" will change the setting to "OFF" (none).
I
[Quick Select Defaults]
If headphones are plugged in, the headphones settings screen
appears.
Adjusting the volume of groups of speakers
(Fader Function)
This function lets you adjust (fade) the sound from all the front (Front
speaker / center speaker / Front Heightspeakerl or rear (Surround speaker /
Surround Back speaker) speakers at once.
CH~ ~
•
1
Use
0
or v to select "Fader", then select the Item to
be adjusting using
<I
or
[>.
2
Press
<I
[>
to adjust the volume of the speakers.
InDut Source Volume
Quick Select 1 DVD -40 dB
Quick Select 2 SAT/CBL -40 dB
Quick Select 3 VCR/iPod -40 dB
Calling the settings out
- - QUICK SELECT--
IDVDI ISAT/CBl) {VCR/;Podl
Press the
[ I ] [ I ] IT]
at which the settings you
want to call out are saved.
'n,n4
Input sources stored with the quick select function cannot be selected
if they have been deleted at menu "Source Delete" (@"page 28) In
this case, store them again.
• The fader function does not affect the subwoofer.
• The fader can be adjusted until the volume of the speaker adjusted
to the lowest value is -12 dB.
o
Naming Quick Select settings
"Quick Select Name" (@"page 29).
45