Denon AVR-1610 Owner's Manual page 45

ENGLISH
:;i
o
c::
C"
iO
'"
: :r
o
S
5'
'"
I
after the Audyssey Auto Setup
Default settings are underlined.
Setting contents
"Base Curve Copy" is displayed
procedure has been performed.
Setting contents
Adjusting the Sound Field Effect (Parameter)
Day : Low setting provides the least adjustments to the loudest and
softest of sounds.
Evening: Middle setting prevents loud and soft sounds from being much
louder and softer respectively than average sounds.
Midnight: High setting affects volume the most, causing all sounds to be
of equal loudness.
1. Select speaker adjustment method.
All CH : Adjust tonal quality for all speakers together.
L/R CH : Adjust tonal quality for each LlR speaker pair.
Each CH : Adjust tonal quality for each speaker separately.
. 2. Select the frequency band to be adjusted.
63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz /
16kHz
:>.:: When" LlR CH" or "Each CH" is selected, select the speaker to be
adjusted.
'3. Adjust the level.
-20.0dB - +6.0dB (OdB)
Setting items
This can be set when
"Dynamic EO" (iGYpage
42) is set to "ON ':
Adju~t tonal quality' for eacbspeaker using graphic equalizer
(Manual EQ)
Setting
Set Dynamic Volume effect.
Seuing items
AdjustCli
Adjust the
~onal
quality of
the individual
speakers.·~
Default _
Yes: Reset to the defaults.
Reset the "Manual EO·
No:
Do not reset to the defaults.
settings10 their defauits..
'Ba~ ~rVe'GoPY,'~ ~ ,"
Yes: Copy.
Copy tl:i~W1lirtEQ 'IAudySs.~ 1
No : Do not copy.
Flat" correction curve.
l
o
"Off"
"Red"
"Red"
"Green"
Dynamic EO : DNNolume : OFF __ Dynamic EO / Volume: OFF
ON :
Use Dynamic EO function.
OFF: Do not use Dynamic EO function.
. ,.• When set to "ON",
"~~WJ'
"is displayed.
OYN eQ
• When "MultEO" is set to "OFF'; "Dynamic EO" is automatically set
to "OFF"
. . mm!I
• This can also be set by pressing
c:::J.
Setting contents
• When set to "ON ';
"~J~
"is displayed.
• When "MultEO" is set to "OFF", "Dynamic Volume" is automatically
set to "OFF". lIB
• This can also be set by pressing
c:::J.
Dynamic EO / Volume: ON - - Dynamic EO : ON / Volume: OFF
[~\!.~~~~~] [~\!.~~~~!'"~J
~rJ- -0-
/ I" / I"
Reference Level Offset: Audyssey Dynamic EO takes the standard film
mixing level of 85 dB SPL during -20 dB FS input as its reference level.
However, since standardization is lacking outside the film industry, the
reference level of media contents may not be appropriate. In order to
view such contents, Reference Level Offset of Dynamic EO has available
offsets of 5 dB, 10 dB and 15 dB.
• OdB : Suitable for viewing movies.
• 5dB : Suitable for listening to classical music and other content mixed
at a high level.
• 10dB : Suitable for listening to jazz and other audio sources with a wide
dynamic range. Also suitable for viewing TV.
• 15dB: Suitable for listening to pop, rock music and other content with an
extremely wide dynamic range.
4n.n4
"Tone Control" is set to "OFF" when "Dynamic EO" is set to "ON':
Setting is enabled when "Dynamic EO" is "ON':
ON:
Use Dynamic Volume. The Dynamic Volume effect will be at the level
of the "Setting" (iGYpage 42)
OFF: Do not use Dynamic Volume.
This can be set when
"Dynamic EO" (Grpage
42) is set to "ON':
This can be set when the
"rv1uitEO" (&page 41)
is set to anything other
than "OFF':
Setting items
DynamicEQ
Audyssey Dynamic EO solves
the problem of deteriorating
sound quality as volume is
decreased
by
taking into
account human perception
and room acoustics.
Dynamic Volume
Audyssey Dynamic Volume
solves the problem of
large variations in volume
level between television
programs, commercials, and
between ·the soft and loud
passages of,movies.
Remote control
operation buttons
MENU
Displaying the menu
o .
Cancel the menu
CD
8 8:
Moves the cursor (Up/Down/Left/Right)
CD
8 :
Decision the setting
o :
Return to previous menu
RETURN
42