Menu Map - Denon AVR-1610 Owner's Manual

ENGLISH
Settin s
With the AVR-1610, settings and operations for most functions can be performed by operating while looking at the menus displayed on the monitor screen.
I
;;
Menu map
MENU
2
Press
6.
V to
3
Press
6.
V to
4Use 6. V
<lC>
to select the item,
MENU
1
Press O. 5Press O.
o
Operations
The menu is
select the item select the item then press
8
to set.
displayed. ¢
you want to
¢
you want to ¢
*
To return to the previous item, press
R~'
¢
set, then press set, then press
press
8
to
The settings made up to that
*
Select "Default Yes", then point are entered and the
8. 8.
reset to the default setting.
settings menu screen turns oft.
o
Setting menus
Setting items Number
Detailed items
Description Page
lIo..
1, Parameter
1-1 Surround Parameter Adjust surround sound parameters. 39
"
Adjust various audio parameters.
1-2 Tone Control Adjusts the treble and bass tone. 41
MENU
1-3 Audyssey Settings Makes the MultEO, Dynamic EO and Dynamic Volume settings. 41
1. Parameter
1-4 Manual EQ Adjust tonal quality for each speaker using graphic equalizer. 42
2, Information 1-5 RESTORER Uncompress compressed sources and apply bass boost for richer sound. 43
:-f,- A- Lit- 0-
-$"
e-f u-p ---
1-6 Audio Delay Compensate for incorrect timing between video and audio. 43
. .
:4. Manua I Setup
2. Information 2-1
Status
Shows information about current settings. 43
:_5_·_JJ1P_~
t __
~_~Lu_Q
__
I
Show information about receiver
2-2 Audio Input Signal Shows information about audio input signals. 43
settings, input signals, etc.
2-3 HDMI Information Displays the HDMI input/output signals and TV information. 43
2-4 Auto Surround Mode Displays the settings stored for the auto surround mode. 43
[E NT] :S I>lect
2-5 Quick Select Displays the settings stored for the Quick Select function. 43
2-6 Preset Channel Shows information about preset channels. 43
Items that only need to be set once
~
3. Auto Setup
speaker
I
3-1 Audyssey Auto Setup Makes the optimum settings for the speakers being used 20
Makes the
optimum automatically.
Set these for example upon purchase.
settings and corrects for the
3-2 Parameter Check Check Audyssey Auto Setup measurement results. 23
Once these items are set, there is no need to
set them again unless the speaker layout or the
acoustic characteristics of the
This item is only displayed after the Audyssey Auto Setup procedure
connected speakers have been changed.
room.
has been performed.
4
4. Manual Setup ,
4-1 Speaker Setup Sets the speaker size and distance, the channel level, etc. 24
\.....) \..J. \..Jt '-"
Use this to make various types of
4-2 HDMI Setup Make settings for HDMI video/audio output.
27
,00. O",.Q.,
detailed settings.
4-3 Audio Setup Make settings for audio playback.
28
=I;;m]=~
4-4 Option Setup
Make various other settings. 28
era
CJ
=
4
5. Input Setup
5-1 Assign Change input connector assignment. 31
~ill
~O;B
Use this to make settings related
5-2 Input Mode
Sets the audio input mode and decode mode. 32
to playing input sources
5-3 Rename Change the display name for this source. 32
I ,~
~.
e
li
G
5-4 Source Level
Adjust the playback level of the audio input. 33
o
d
5-5
iPod Playback Mode
Make settings for iPod playback. 33
fff;······~/-
:(
5-1 Auto Preset Use the auto preset function to program radio stations.
33
)eTc::rG
8
5-2 Preset Skip Set the preset memories that you do not want to display when tuning.
33
t.I<~lID
11;1'$"
~ t.l#.liX.
• , • I ). •
5-3 Preset Name Assign name to a preset memory.
33
17