Connecting Devices Not Equipped With Hdmi Connectors - Denon AVR-1610 Owner's Manual

ENGLISH
-AUDIO-
OPTICAL
OUT
Monitor (TV)
For instructions on HDMI connections, see "Connecting Devices
Equipped with HDMI connectors" on page 12.
Connecting Devices not
E ui ed with HDMI connectors
• Select the terminal to use and connect the device.
• For video connections, see" Converting input video signals for output
(Video Conversion Function)" (!3T'page 9).
I
Monitor (TV)
The component video connectors may be indicated differently on your
monitor. For details, see the monitor's operating instructions.
Connecting devices
o
Settings related to HOMI connections
Set as necessary. For details, see the respective reference pages.
Input connector assignment
(~page
31)
Set this when changing the input sources of the different connectors.
HOMI Setup (~page 27)
Make these settings related to HDMI input/output signals.
• Auto Lip Sync
• HDMI Audio Out
• HDMI Control
• Standby Source
• Power Off Control
_~[.n*
The audio signals output from the HDMI connectors are only the
HDMI input signals.
o
Connecting to a device equipped with a OVI-O
connector
When an HDMI/DVI conversion cable (sold separately) is used, the
HDMI video signals are converted to DVI signals, allowing connection
to a device equipped with a DVI-D connector.
-N·n*
• No sound is output when connected to a device equipped with a
DVI-D connector. Also make the audio connections.
• Signals cannot be output to DVI-D devices that do not support
HDCP
• Depending on the combination of devices, the video signals may not
be output.
HOMI
OUT
(TV)
OVD
Player
Monitor
HDMI
IN
The AVR-1610 allows connection of inputs from up to 3 HOMI
devices and output to 1TV.
Connections
• Use a cable on which the HDMI logo is indicated (a certified HDMI
product) for connection to the HDMI connector. Normal playback
may not be possible when using a cable other than one on which the
HDMI logo is indicated (a non-HDMI-certified product!.
• When the AVR-1610 is connected to other devices with HDMI cables,
also connect the AVR-1610 and TV using an HDMI cable.
• When a device supporting Deep Color signal transfer is connected,
use a cable compatible with HDMI ver.1.3a.
• Video signals are not output if the input video signals do not match
the monitor's resolution. In this case, switch the Blu-ray Disc player /
DVD player's resolution to a resolution with which the monitor is
compatible.
-N·n*
• If the menu "HDMI Audio Out" setting (i3f'page 27) is set to "AMP':
the sound may be interrupted when the monitor's power is turned
off.
• The audio signal from the HDMI output connector (sampling
frequency, number of channels, etc.) may be limited by the HDMI
audio specifications of the connected device regarding permissible
inputs.
I
13