Table of Contents
Advertisement
9.6
Administrator Mode Overview
9.6
Administrator Mode Overview
Logging in to the administrator mode enables you to use the following functions.
Reference
-
For details on the administrator mode, refer to the [User's Guide Network Administrator].
-
The administrator modes are classified into two display modes: [Tab Function Display] and [List Func-
tion Display]. This manual shows an example where the [List Function Display] is set as the display
mode. For details, refer to page 9-12.
9.6.1
Maintenance
Item
[Meter Count]
[ROM Version]
[Import/Export]
[Status Notification Setting]
[Total Counter Notification
Setting]
[Date/Time Setting]
[Timer Setting]
[Network Error Code Dis-
play Setting]
[Reset]
Description
Enables you to check the meter count of this machine.
Enables you to check the ROM version.
Saves (exports) setting information of this machine as a file, or writes (im-
ports) it from a file to this machine.
Configure the function to be reported to a registered user when an error
has occurred in this machine. Specify the destination and items to notify a
registered user of an error.
Configure the setting to notify the target user of the total counter by E-mail,
and register the E-mail address of the destination.
Specify the date and time displayed in this machine.
Configure Power Save or Weekly Timer Setting in this machine.
Specify whether to display the network error code.
Clears all settings for the network, controller and destinations.
9
9-35
Advertisement
Table of Contents
