Xerox Phaser 3310 User Manual page 185

Memory and PostScript SIMMs
8
Make sure that the SIMMs are secured
in place by the metal clips and pins on
both sides of the connectors.
9
Reconnect the power cord and printer
cable, then turn the printer on.
Note:
For PostScript driver installation and usage information on a Macintosh system, refer to
Appendix
refer to Appendix
F.4 P O
RINTER PTIONS
B, "Using Your Printer with Macintosh." For PS printing on a Windows system,
D, "Using Windows PostScript Driver."
pin
clip