IBM Enterprise Storage Server 2105 E10 Introduction And Planning Manual page 110

Table 22. Communication Resources work sheet (continued)
i. Customer-contact telephone number
j. Call-back password
k. Outside line prefix
l. Enable remote IBM PE login across a LAN
6. Modem configuration
a. Name of modem set:
b. Dialer phone system (check one)
c. Modem data rate (check one)
d. Cancel the call if it does not connect within:
e. Number of consecutive retries for connection
f. Name of the expander set
g. Expander port for the modem
h. Expander port for cluster 1
i. Expander port for cluster 2
7. e-mail configuration
a. Maximum error notification count per problem
b. Add e-mail destinations
______________________________
______________________________
c. Enable smart relay host? (check one)
If yes, enter host name or network address
d. Enable local e-mail? (check one)
8. SNMP configuration
a. Allow MIB access? (check one)
b. Allow generic traps? (check one)
c. Allow product-specific traps? (check one)
d. Maximum trap notifications per problem
e. SNMP community name
f. SNMP SysContact (optional)
g. SNMP SysLocation (optional)
h. Add SNMP trap destinations
______________________________
______________________________
9. Customer pager information (optional)
86
ESS Introduction and Planning
(IBM service personnel fill in this section)
Primary:_______________ Off shift:_____________
________________________________
________________________________
h Yes h No
________________________________
h tone h pulse
h Fastest speed available
h14400 h16800
h 24000
h26400
________ seconds
________
________________________________
_____ (1 - 16)
_____ (1 - 16)
_____ (1 - 16)
________________
Enable for: (check one)
1. herrors h information h all h none
2. herrors h information h all h none
h Yes h No
____________________________
h Yes h No
h None h Read Only
h Yes h No
h Yes h No
h 19200
h21600
h28800