AOpen NMCP68ST Manual page 30

Standard CMOS Features > IDE Channel 0 Master > IDE HDD Auto-
Detection
Press "Enter" to auto-detect parameters of HDD.
Standard CMOS Features > IDE Channel 0 Master > IDE Channel 0 Master
Defi ne the parameters of IDE devices in Channel 0 (Master or Slave).
Available options:
None: If there is no device, please select "None" for speeding boot up.
Auto: This will enable BIOS to auto-detect parameters of IDE device. (Default)
Manual: Allow users to defi ne parameter of IDE device.
Standard CMOS Features > IDE Channel 0 Master > Access Mode
Set the using mode of HDD. Available options: CHS / LBA / Large / Auto
(default). User can select the mode according to the label on HDD.
Cylinder: Enter cylinder number
Head: Enter head number
Precomp: Write precompensation
Landing Zone: Location of head
Sector: Sector number
Standard CMOS Features > HaltOn
This parameter enables you to stop the system in case of Power-On Self Test
(POST) error. Available items: All errors / No errors / All, But Keyboard
24